NOTES:

• Labels and ribbons (if using ribbon) should travel through the printer left-justified.
• While the media sensor is adjustable, for most CPR+ users adjustment is never required.
• The media guide should be justified against the right side of the labels, holding them against the printer wall.
• The media guide should be flush against the label's liner without crimping it.
• While the printhead leveling cam is adjustable, for most CPR+ users adjustment is never required.
• The printhead should be pushed down until there is a good "click" to ensure that it is latched properly.
  

If you encounter any issues, please consult our troubleshooting guide.