M-Class Media Loading

 

 

Note: Ribbon is blue for demonstration purposes only. Your ribbon will be black.

NOTES:

• Labels and ribbons (if using ribbon) should travel through the printer left-justified.

• While the media sensor is adjustable, for most CPR+ users adjustment is never required. Pull the white line (visible from the front of the printer) to the middle of your label and forget it.

• The media guide should be justified against the right side of the labels, holding them against the printer wall.

• The media guide should be flush against the label's liner without crimping it.
  

• While the printhead leveling cam is adjustable, for most CPR+ users adjustment is never required.
  

• The printhead should be pushed down until there is a good "click" to ensure that it is latched properly.

If you encounter any issues, please consult our troubleshooting guide.